The Intelliclean Air 9000, with an elegant, luxurious and modern European influenced design the Inteliclean Air 9000 is an alluring addition to any bathroom. It is one of our most advanced retro-fit bidets that was specifically designed to adhere to Australian Health & Quality Standards. Using the latest knowledge in health technology, this bidet was designed with a unique back-flow prevention system that has succeeded in all extensive safety testing. It also features a slimline easy to use remote control.
All functions are managed from an easy to use, intuitive touch screen remote control which can be handheld or mounted on the wall.
Mini Side Control
Puts some functions in a mini pad on the side of the seat – Power, Rear Cleansing & Nozzle Cleansing
Oscillate / Move
Moves the nozzle forward and backward in a rhythmic action for a more thorough cleansing and stimulating wash.
The water sprays in a rhythmic pulsating action for a soothing stimulating wash.
A pencil thin stream of soft aerated water is ideal for constipation. Use while trying to pass a bowel movement for the best results.
The child function reduces the pressure of the water to 50%.
Removes bad odours by sucking the air out from the bowl through a charcoal block neutralising any smells. Activated by the seat sensor being activated.
Blows warm air to gently dry you after a wash and offers 5 temperature settings.
When sitting on the seat it will warm up to the desired temperature and offers 4 different temperature options (no heat + 3 heat settings).
Cleanses with warm water and offers 4 temperature settings (no heat + 3 heat settings) and 5 water pressure settings.
This function is for washing the bottom area only.
This feature is exclusively for women, to use for their vaginal area.
When a user activates the seat sensor the water begins to warm up. When the user presses a wash button the water is at the desired temperature before entering the nozzles.
This bidet comes with a single hardened Stainless-Steel Nozzle. These decrease soiling and bacterial growth whilst improving hygiene.
Nozzle Position Adjust
The nozzle is adjustable to 5 different positions and should be adjusted to the correct position for washing.
Before and after each use of the nozzle, they automatically clean themselves to avoid cross contamination. There is also an additional manual button if they require additional cleaning.
The moisture activated seat sensor is incorporated in the design to ensure that the bidet or automatic flushing functions cannot be activated unless the seat is occupied. The seat sensor is located between 3 & 5 o’clock on the toilet seat.
Soft Close Seat & Lid
Hydraulic dampers installed at the hinges allow the seat and lid to close softly.
The Bidet is made with antibacterial plastic to ensure the highest degree of hygiene & cleanliness.
The Bidet senses when it is not occupied and will automatically go into “power save mode”. This function can be turned off and on.
An average wash uses about a teacup or two of water.
This bidet has a quick release base plate on the bottom of the bidet to enable this bidet to be fitted to toilets that have access to seat bolts and toilets that are fully concealed. With the press of 1 or 2 buttons you can slide the bidet toward the front of the toilet for easy removal.
You must ensure that you have a tap on the wall, a powerpoint within 1.5 metres of the toilet & a plumber to complete your installation.
This bidet has a quick release base plate on the bottom of the bidet to enable this bidet to be fitted to toilets that have access to seat bolts and toilets that are fully concealed.
NOTE: You will need to know if your tap is located on the LHS, RHS or in your cistern when looking at your toilet. You will also need to know if you have access to the seat bolts. This knowledge is required as extra accessories for installation may need to be purchased.
NOTE: If being installed on a toilet with access to seat bolts – Bottom Fixing Bolts must be purchased separately.
Additional products that may be required:
- If TAP is on RHS – 1m of ¼” White Pipe and 1x John Guest Adaptor is required
- If TAP is in the Cistern – ½” Internal Fitting Kit 1x John Guest Adaptor & 1m of White Pipe is required
- If installed on a bottom fixing toilet – Bottom Fixing Bolts are required
- If installed on a bottom fixing toilet with arms/rails & 80mm spacer – Bottom Fixing Bolts & Extension Brackets are required
- If installed on a top fixing toilet – Top Fixing Bolts are required
- If installed on a top fixing toilet with a 50mm spacer – Extra Long Top Fixing Bolts are required
- If installed on a top fixing toilet with Arms/Rails – Top Fixing Bolts are required
- If installed on a top fixing toilet with a 50mm Spacer and Arms/Rails – Extra Long Top Fixing Bolts are required
- If installed on a top fixing toilet with an 80mm Spacer – Extra Long Top Fixing Bolts & Stabilisers are required
- If installed on a top fixing toilet with an 80mm Spacer & Arms/Rails – Extra Long Top Fixing Bolts, Stabilisers and Extension Brackets are required